Use and Care Manual

25
Instructions for Use
System Reset
If the robot does not respond when you press a button or the
robot cannot be shut down, reset the system by pressing and
holding the
button. The robot will restart automatically after
resetting.
Firmware Update
Update the robot using the Mi Home app. Place the robot on the
Charging Dock and ensure that the battery level is higher than
20% before updating. The Power Indicator will ash white quickly
during a rmware update.
Restore Factory Settings
If the robot is not functioning after a system reset, press and hold
the
button and the button together until the "Restoring
factory settings" voice alert sounds. The robot will then be
restored to factory settings. Ignore the "Resetting WiFi" voice alert.