Use and Care Manual

20
3. Add device
1. Download app
Search for "Mi Home" in the App Store or Google Play or
scan the QR code below, then download and install the app.
Open the Mi Home app and tap the "+" in the top right corner.
Add the robot by following the in-app prompts. After adding,
the robot can be found on the home page.
2. Reset WiFi
a. Open the top cover of the robot to reveal the WiFi
indicator light.
b. Press and hold the
and buttons until you hear the
Resetting WiFi voice alert. The reset is complete when the
WiFi indicator ashes slowly. The robot will then wait for a
connection.
Note:
•
Due to ongoing Mi Home development, the actual process may dier slightly from the
above description. Always follow the instructions given in the app.
•
Only 2.4GHz WiFi is supported.
Installation
Connect to the mobile app (recommended)
This robot uses the Mi Home app.
4
•
O: WiFi disabled
•
Slow ashing: Waiting for
connection
•
Fast ashing: Connecting
•
Steady: WiFi connected
WiFi indicator light
Note: If you cannot connect your phone to the robot, reset the WiFi, and add your robot
as a new device.