Roborock Q7 Max Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
English 03 Français 12 03 Restrictions Deutsch 21 04 Product Overview Italiano 30 04 Installation 06 Connect to the App Español 39 06 Instructions Polski 48 08 Routine Maintenance Norsk 56 09 Basic Parameters 10 Errors Svenska 64 11 FAQs English Contents 02
English Restrictions WARNING • For the purposes of recharging the battery, only use the detachable supply unit roborock CDZ11RR, CDZ12RR, AED03HRR or AED04HRR provided with this product. • Do not use this product on elevated surfaces without barriers such as the floor of a loft, an open-ended terrace, or on top of furniture. • To prevent blocking the product and to avoid damage to valuables, remove lightweight items (such as plastic bags) and fragile objects (such as vases) from the floor before cleaning.
A Product Overview A1 Robot (Top View) —Power/Clean • Press and hold to turn the robot on or off • Press to start cleaning —Status Indicator Light • White: Battery level ≥ 20% • Red: Battery level < 20% • Pulsing: Charging or starting up • Flashing red: Error —Spot Clean/Child Lock • Press to Spot clean • Press and hold for 3 seconds to turn on/off the child lock —Dock • Press to return to dock Note: Press any button to stop the robot during cleaning or docking.
the floor. To ensure a better user experience of the mobile app, place the charging dock in an area with good WiFi coverage. B1-1 More than 0.5m (1.6ft) B1-2 More than 1.5m (4.9ft) Notes: • Allow at least 0.5m (1.6ft) of clearance on each side, and more than 1.5m (4.9ft) in front of the charging dock. • If the power cable hangs vertical to the ground, it may be caught by the robot, causing the charging dock to be disconnected.
Note: Clean the mop cloth after 60 minutes of mopping to maintain water flow and cleaning quality. B3-6—Remove the mop cloth mount When the robot returns to the dock after cleaning, press the latches on both sides, and slide the mop cloth mount backwards to remove it. Option 2: Search for “Xiaomi Home” in the App Store or Google Play or scan the QR code to download and install the app. Instructions On/Off Notes: Press and hold the button to turn on the robot.
Notes: Notes: • To allow the robot to automatically vacuum and return to the dock, start the robot from the dock. Do not move the dock during cleaning. • Cleaning cannot start if the battery level is too low. Allow the robot to charge before starting cleanup. • If cleaning is completed in less than 10 minutes, the area will be cleaned twice. • If the battery runs low during the cleaning cycle, the robot will automatically return to the dock. After charging, the robot will resume where it left off.
Custom Cleaning Modes • Scheduled • Selective Room • Zone • No-Go Zones & Invisible Wall • Custom • Carpet Boost Cleaning Mode Switch • Suction Power Levels • Mop Intensity Levels Robot Information • Cleaning History • Battery Level • Care & Maintenance More Features • Firmware Update • Volume Adjustment • Language Selection • Do Not Disturb mode • Voice Assistant Support Note: Functions and details of the app may vary slightly due to the continuous app development and updates.
Note: Purchase an additional filter and alternate if necessary. C6 Mop Cloth Basic Parameters Robot * Clean after each use and replace every 3-6 months Model Q380RR Remove the mop cloth from mop cloth mount. Clean the mop cloth and air-dry it. Battery 14.4V/5200mAh lithium-ion battery Note: A dirty mop will affect the mopping performance. Clean it before use. Weight Approx. 3.7kg Rated Input 20VDC 1.
Errors If an error occurs while the robot is cleaning, the power indicator will flash red quickly, and a voice alert will sound. Refer to the following table for troubleshooting. Error 13: Charging error. Clean charging contacts and retry. 1. After resolving any of the following errors, relocate your robot and restart cleaning. Error 16: Robot tilted. Move to level ground and restart. Error 14: Battery error. Error 17: Side brush error. Reset robot. 2.
FAQs Problem Solution • Battery low. Put the robot on the dock and charge it before use. Unable to power on. • Battery temperature too low or too high. Only use the robot within the range of 4-40°C (39.2-104°F). Unable to charge. • If the dock is not receiving power, check that both ends of the power cable are properly connected. • If the contact is poor, clean the charging contacts of the dock and the robot. • Confirm that the dock indicator is on. Slow charging speed.
