Product Manual
Chapter 7-6
Robomow RL555, RL855, RL2000
Scan Width 7.2.7
Use the Scan Width option to change the mowing movement of Robomow.
This can be beneficial n some lawns
If the mower is continuously moving back and forth along the same ❍
path, it is recommended to ncrease scan width.
Fast Edge 7.2.8
Use the Fast Edge option to change the speed at which Robomow tracks
the Perimeter Wire. (This option is available only for RL2000s base zone).
This option is suitable if the perimeter is long and straight. If the Perimeter
is curved or wavy, the “Fast Edge” option is NOT recommended.
Enable Dock 7.2.9
Use the Enable Dock to switch ON the docking options menu of the Base
Station.
If Enable Dock is turned off, the docking options menus are hidden.
Eco mode 7.2.10
Use ECO (Economic) option to operate Robomow with the
minimum energy needed for cutting the grass and maintaining
the lawn.
As a default, the ECO mode is set ‘off’. Operation in ECO mode
reduces Robomow noise level during operation and allows longer
operation periods.
It is recommended to use the ECO mode only in Base Station
zones where mowing is more frequent and a shorter part of the
grass is cut. If Robomow detects high grass, it will automatically
increase the power of the mowing motor to enable cutting higher
grass.