Product Manual

Chapter 7-5
Setting Robomow and using Advanced Features
Set Default Edge
Use the Default Edge function to re-set edge mowing of a specific zone
back to Robomow’s defaults.
Child Guard 7.2.2
“Child Guard” is a safety feature that prevents young children or other
unauthorized people from activating Robomow.
When Child Guard is set, Robomow will start operation ONLY after
unlocking it.
c IMPORTANT c It Is strongly recommended to turn this feature on.
This will prevent children or anyone unfamiliar with the mower, form
activating it.
To unlock Robomow’s Child Guard: ❍
Press the ) arrow and then press the
�
key
Sound 7.2.3
Use the Sound option to turn all non-safety sounds off.
This option still KEEPS all safety sounds on.
Wire position 7.2.4
Use the Wire Position option to test the Perimeter Wire’s position at “Edge”
mode, and wish to do that with the mowing motors switched off.
This prevents damage to the Perimeter Wire after its initial setup has been
completed.
Language 7.2.5
Use the Language option to view the display in other languages.
Scan Type 7.2.6
Use the Scan Type option when you wish the mower to move
in a random, irregular pattern. This type of mowing movement
will replace Robomow’s default Compass directed movement.
In Random movement Robomow movement pattern is irregular so it opens
a different angle whenever reaching the perimeter wire or an obstacle.
c IMPORTANT c It is recommended to change the settings to
‘Random’ only if local interferences to the compass cause Robomow to
drive back in the same direction with no progress.




