Product Manual

Chapter 6-3
Charging
Power Management and Charging Alerts 6.3
The Power Pack should be fully charged before starting any 6.3.1
operation.
Verify that the Power Pack is fully charged before operating it. ❍
Check for any excessive energy consumers like: dull blades, or heavy ❍
grass accumulation around the blades.
To even increase energy efficiency
Robomow operates under two run-time modes6.3.2
Robomow’s Power Management System helps protecting its battery.
Robomow should always be either charging or in operation. ❍
If Robomow is neither charging nor operating, it will give a )
warning, reminding the user to charge it.
If Robomow is not connected to the charging outlet within a )
specific period of time, it will enter a “deep sleep” mode in
order to conserve power.
In order to wake Robomow up from its deep sleep mode: )
remove the Power Pack for 10 seconds and then reinsert it.
Off-season storage 6.4
Preparing Robomow for off-season storage:
Fully charge the Power Pack. ❍
Remove Power Pack from Robomow and store it in a dry location at ❍
room temperature.
The Power Pack may be left in a garage or a shed if the temperature there will not
drop below -20 ºC (-4ºF).
Recharge the Power Pack every three months while in storage. ❍
c Important c For further details of winter storage, please refer to section
10.9.