Product Manual

Chapter 4-1
The mowing process – automatic and manual operation
The mowing process – automatic Chapter 4
and manual operation
For added safety:4.1
Manual operation is disabled when the Manual Controller is in the ❍
holder.
For manual operation: Remove Manual Controller from its )
holder.
Automatic operation is disabled when the Manual Controller removed ❍
from the holder.
For automatic operation reinsert Manual Controller in its )
holder.
Adjust the controller and its coil until it is at level with top of Robomow.
Driving Robomow – general instructions4.2
Parts of the mowing process require driving Robomow to various locations
in or out of the lawn.
Remove Manual Controller from its holder. ❍
Hold the Manual Controller with both hands, with the ❍

button
side closer to you.
To maneuver Robomow, press ❍

the navigator pad in the direction
you wish Robomow to move.
Driving Robomow with the navigator pad takes very little pressure. Pre s
gently. Lightly ro l you finger in the right direction.
The pad is omni-directional. It allows for slight turns as well as sharp turns,
all the way to a complete circle.
To change speed: press the Speed Button ❍ to toggle between
fast and slow movement.
To stop driving: just release the Navigator Pad. ❍
Depart4.3
“Depart” is the starting step of the mowing sequence. At Depart the
Perimeter Switch on the Base Station control panel is automatically
switched on by Robomow.

4.3.1 once you set a Weekly Program, (see Chapter 5),
Robomow will automatically depart to start mowing your lawn at
days and times you have scheduled.











 