SDS

版 别
Revision
A
页 次
Page
受 控 号
Controled
实施日期
Issued date
16 质量评定程序 Quality evaluation
质量检验分为鉴定检验和质量一致性检验。
Quality inspection is divided into appraisal inspection and quality consistency check.
鉴定检验一般在设计定型、更改设计和生产定型时进行。抽样方案、检验项目、顺序以及判定规则等事宜由
供需双方协商确定。原则上应包括以上各项性能试验。质量一致性检验分为逐批检查和周期检查，用以判定产品
生产过程中能否合格保证产品质量的持续稳定。可以参照本规格书或者其他质量协议。具体抽样方案、检验
项目、顺序以及判定规则等事宜由供需双方协商确定。
17 质保 Quanlity guarantee
18 其他事项 others
以上所述,可以作为供需双方对于电池产品性能和检验规则的约定框架。如果没新的书面约定或更改通知，即可按此执行。
本技术规格书参考客户要求及电芯的规格书及其它相关标准制订
质保期1年（以惠州市蓝微电子有限公司出货开始算，因客户原因导致订单延迟交付则以蓝微生产时间开始算）。
The warranty period is 1 year(warranty period start from the delivery of Huizhou Blueway .if order delay due
to customer reasons the warranty period is calculated from the time of Blueway's production time .
文件编号
Document NO.
W******.01.01
2020/7/1
Identification test general proceed in design,design change and production.Sampling plan、
inspection items、order and decision rules should be confirmed by the supply and demand.In
principle,it should include the above performance test.Quality consistency test is divided into
batch-by-batch inspection and periodic inspection, to determine if it can ensure product quality is
stable in the process of production.You can refer this specification or other quality agreement,
Specific sampling plan, inspection project, sequence and decision rules should be confirmed by the
supply and demand.In principle, the inspection items of batch-by-batch inspection should include
the appearance,internal resistance,rated capacity or 0.2 C
5 A discharge capacity, etc
As above, it can be used as rules framework for battery product performance and stipulations of
inspection to supply and demand.If there is not new agreement in writing or change notification, then
perform according this.
惠州市蓝微电子有限公司.标准文件
HUIZHOU BLUEWAY ELECTRONICS CO.,LTD.Standard Document
文件名称
Document name
305W001(FR-5S4P)-01电池产品规格书
Specification for 305W001(FR-5S4P)-
01
18/19