Installation Guide

70
• For best results - It is recommended to not set more than 2 days in a
row without mowing.
• After the necessary mowing is completed for a given day, the mower
will stay in its Base Station until the next working day.
• By default the mower will be set with intensive mode switched ‘On’. In
this mode the mower will temporarily (for 7 days) work in the maximum
capacity mowing mode. This is done to bring your lawn quickly to an
even height before the mower switches into its automatic maintenance
schedule.
• If at any time during the season, the mower has gotten far behind on
coverage (possibly due to being switched o for an extended time, or
because of a burst of very fast grass growth, etc...) you can re-enable
Intensive Mowing to allow for the mower to catch back up. This will
operate the mower at max. capacity for 7 days after which time it will
change back to your previous schedule settings.
Note:
A/B/C