Installation Guide

Annex B - Test wire

position

1. While your mower is driving on the wire please observe for the following

possible situations:

a. Wire too close to obstacles

If the mower encounters an obstacle while following the wire, it will

maneuver around it. In these situations, adjust the wire further away

so that the mower will clear the obstacle without having to depart the

wire and navigate around it.

b. Wire too close to edge of lawn

If the mower falls off the edge of the lawn as it travels the wire,

adjust the wire further inward away from the edge.

c. Wire too far from obstacles and / or edge of lawn

Your mower has the unique ability to mow very close to obstacles

and the edge of your lawn. If you see areas where it would not mow

as close as you would like, simply adjust the wire further in. Just be

careful to avoid situations “a & b.”

d. Rough or challenging terrain

If you see areas where the mower appears to have limited traction

or is otherwise struggling to maneuver accurately, you should likely

adjust the wire around these areas. Very loose or sandy soil, rocky

or rooted terrain, and/or highly uneven surfaces can increase the

chances of your mower getting stuck and not reliably making it

back to the Base Station to charge every time. Areas that are very

challenging in dry conditions are likely to become much more so after

heavy rainfall.