Installation Guide

3
Always connect the power supply to the indoor, weather-protected power
supply circuit protected by a residual current device (RCD) with a tripping
current of not more than 30 mA. Follow local electrical installation instructions.
Allow the blades to stop rotating completely before lifting or tilting the mower
or approaching the blades.
It is your responsibility to:
• Restrict the use of this mower to persons who have read, understood and
follow the warnings and instructions in this guide and in the mower
• Inform your neighbours that you have a robot mower in operation and that
they may be injured if they access your lawn during operation
Important Safety Information
In case of lightning, disconnect the perimeter wire from the base station and
unplug its power supply from the socket.
CAUTION
DANGER
The power supply cord must not be replaced! If the cord is damaged, the entire
power supply must be replaced. Do not connect a damaged power supply cord
to the power supply and do not touch a damaged power supply cord as it can
cause electric shock.
Keep all power supply cords away from underneath the mower to prevent
damage.
DANGER
WARNING
WARNING