Use and Care Manual

66 67
Scroll through all the days to
the right, until the ‘Inactive
Hours’ will start blinking.
Set the time, at which the
Inactive Hours start
and press OK.
Set the time at which
the Inactive Hours end
and press OK.
• The mower will not operate during the Inactive Hours
throughout all days of the week.
• If too many days/hours have been
deactivated relative to the zone area,
then “E8” (Decrease Inactive Time)
will be displayed - you need to decrease
the amount of inactive time so that the
mower will have enough time to mow
your lawn.
•
To set the “Inactive Hours” to “Off” set the same time for the
start and the end (i.e.: 00:00 to 00:00).
TIPS
Plan mowing times for safety.
Always make sure that the mower is set to work when the lawn
is vacant. In addition, always set “mowing-free” times when
people (especially children) or pets may be found in vicinity.