Operation Manual

36
7. Using The Power Box
7.1 Power Box Alerts
Event Alert
Docking Indicator is lit. The mower is in its Base Station.
Operating Indicator is lit The mower is not in its Base Station.
On/Off Button Indicator is lit.
‘OFF’ will be displayed on
the mower.
Mowing schedule is Off.
Wire Indicator -
Flashes and Beeps
The Perimeter Wire is cut,
disconnected, or too long.
All Indicators ash
The mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
All Indicators ash and Buzzer
sounds for 10 seconds.
The Anti-Theft option is set to On,
and the mower was removed from
its Base Station when it was not
scheduled to operate.
Note - To stop an alert when sounding, press the On/Off Button.
7.2 Turn the Buzzer On/Off
• Press and hold the On/Off button for 10 seconds.
- A short beep indicates On.
- A ash indicates Off.
7.3 Disable the Automatic Operation
• This option is used to disable the predened Automatic Operation of Robomow. This option does not
prevent Manual Operation (Chapter 6.3).
• Press and hold the On/Off button for 2 seconds.
‘OFF’ will be displayed on the mower:
o If Robomow is currently in the process of mowing:
- Robomow will complete the current mowing cycle.
- After returning to the Base Station, Robomow will not go out for its next scheduled operation.
• To Enable the Automatic Operation
o Press and hold the On/Off button for 2 seconds.
Docking Indicator
Wire Indicator
Operating Indicator
On/Off Button