Operation Manual

7
2. Know Your Robomow

2.1 What’s in the Box
Operating & Safety Manual
DVD
1 Robomow® 8
Plot Connectors
Used for connecng the Perimeter Wire to the Base Staon
2
Wire Pegs
Used for securing the wire to the ground.
9
Base Staon
Used by Robomow to dock and charge when it is not
mowing.
3
Perimeter Wire
Used to create a virtual wall for your Robomow
10
Base Staon Stakes
Used for securing the Base Staon to the ground
4 Operang & Safety Manual 11
Extension Cable
15 meters (50 .), (Low voltage cable)
5
DVD
Setup and Operaon Video.
12
Power Box
Used to deacvate (halt) the automac operaon mode
and reacvate it as needed. Also provides indicaon
of Robomow’s status (Docking or Operang) and the
Perimeter Wire’s health.
6
RoboRuler
Used for seng the distance of the Perimeter Wire from the
lawn edge.
13
Power Box Mount
Used for xing the Power Box to a wall (including Screws and
dowels).
7
Wire Connectors
Used for splicing wires (as needed)
14
Perimeter Switch (incl. Power Supply and Stake)
Used to generate the signal in a Non-Base zone. The
Perimeter Switch comes with models which are not supplied
a Base Staon and is available as an accessory.
Models without
a Base Staon
Models with a Base Staon
14
13
12
11
10
9
87
6
5
4
3
1
2