Operation Manual

30
6. Robomow Operation
6.1 Automatic Operation
o During the One-Time Setup, you have dened the size of your lawn. Robomow will automatically derive the
required Mowing Time for your lawn.
o The One-Time Setup congures Robomow to perform automatically the following cycle of operations:
- When the battery is fully charged Robomow departs from the Base Station.
- Robomow mows the lawn.
- It searches for the Base Station when the battery level gets low (Robomow doesn’t mow when it is
searching for the Base Station).
- It recharges the battery and gets ready for the next scheduled operation.
- It continues mowing until it completes the required time for the lawn area (this is known as a Mowing
Cycle).
Note: Robomow mows the Edge only in the rst mowing of each cycle. In the rest of the operations, Robomow
mows the lawn without the Edge.
o Robomow stays at the Base Station during the default Inactive Time (All day Sunday and nighttime daily
23:00 to 06:00). Inactive Time may be changed – see Section 6.4.1.3.
o Mowing Time is derived from the set lawn Area.
Mowing Time may be changed using the Intensity menu – see Section 6.4.1.2.
o Robomow mows the entire area Twice a week.
This frequency can be changed using the Interval menu – see Section 6.4.2 (p001 in the table).
Note!
Robomow has the power to mow high grass. However when mowing high grass during the rst use or the rst
mowing of the season, initially you will see uneven patches of grass.
Please be patient as it may take a few days to one week to overcome and bring the lawn to an even height and
consistency.
6.2 Operating Panel
Operating Panel and buttons:
User / Error messages
Baery and
Charging
indicator
Mower is in the
Base Staon
indicator
Red lit constantly – Low Baery
Green blinking – Charging
Green lit constantly – Fully Charged
Area seng indicator
Day and Time
seng indicator
Intensity seng
indicator
Rain Sensor
Inacve Time
seng indicator
AM
Mo
Tu We Th Fr Sa Su
Days of the week