Users Manual

Category: AcquisitionControl

AcquisitionFrameRate

• type: Float, ranges from 1 Hz to 25 Hz

• default: 25 Hz

• description: Frame rate of the camera (FPS, Section 6.1.3).

ExposureAuto

• type: Enumeration, one of Continuous or Off

• default: Continuous

• description: Can be set to Off for manual exposure mode or to Continuous for auto exposure mode

(Exposure, Section 6.1.3).

ExposureTime

• type: Float, ranges from 66 µs to 18000 µs

• default: 5000 µs

• description: The cameras’ exposure time in microseconds for the manual exposure mode (Manual,

Section 6.1.3).

Category: AnalogControl

GainSelector (read-only)

• type: Enumeration, is always All

• default: All

• description: The rc_visard currently supports only one overall gain setting.

Gain

• type: Float, ranges from 0 dB to 18 dB

• default: 0 dB

• description: The cameras’ gain value in decibel that is used in manual exposure mode (Gain, Section

6.1.3).

BalanceWhiteAuto (color sensors only)

• type: Enumeration, one of Continuous or Off

• default: Continuous

• description: Can be set to Off for manual white balancing mode or to Continuous for auto white

balancing. This feature is only available on color sensors (wb_auto, Section 6.1.3).

BalanceRatioSelector (color sensors only)

• type: Enumeration, one of Red or Blue

• default: Red

• description: Selects ratio to be modiﬁed by BalanceRatio. Red means red to green ratio and Blue

means blue to green ratio. This feature is only available on color sensors.

BalanceRatio (color sensors only)

• type: Float, ranges from 0.125 to 8

• default: 1.2 if Red and 2.4 if Blue is selected in BalanceRatioSelector

8.1. GigE Vision 2.0/GenICam image interface 120