Users Manual

10 Accessories
10.1 Connectivity kit
Roboception offers an optional connectivity kit to aid customers with setting up the rc_visard. It consists of a:
• network cable with straight M12 plug to straight RJ45 connector in either 2 m or 5 m length;
• power adapter cable with straight M12 socket to DC barrel connector in 30 cm length;
• 24 V, 30 W desktop power supply.
Connecting the rc_visard to residential or office grid power requires a power supply that meets EN 55011
Class B emission standards. The E2CFS 30W 24V by EGSTON System Electronics Eggenburg GmbH (http:
//www.egston.com) contained in the connectivity kit is certified accordingly. However, it does not meet immunity
standards for industrial environments under EN 61000-6-2.
Power supply
24V 1.25A
M12 to RJ45 cable
DC barrel to
M12 adapter
Fig. 10.1.1: The optional connectivity kit’s components
10.2 Wiring
Cables are by default not provided with the rc_visard. It is the customer’s responsibility to obtain appropriate
parts. The following sections provide an overview of suggested components.
10.2.1 Ethernet connections
The rc_visard provides an industrial 8-pin A-coded M12 socket connector for Ethernet connectivity. Various
cabling solutions can be obtained directly from third party vendors.
CAT5 (1 Gbps) M12 plug to RJ45
• Straight M12 plug to straight RJ45 connector, 10 m length: Phoenix Contact NBC-MS/ 10,0-94B/R4AC
SCO, Art.-Nr.: 1407417
177