Technical Specs

3 Hardware specification
Note: The following hardware specifications are provided here as a general reference; differences with the
product might exist.
3.1 Scope of delivery
Standard delivery for an rc_visard includes the rc_visard sensor and a quickstart guide only. The full manual is
available in digital form and is always installed on the sensor, accessible through the Web GUI (Section 4.5), and
available at http://www.roboception.com/documentation.
Note: The following items are not included in the delivery unless otherwise specified:
• Couplings, adapters, mounts
• Power supply unit, cabling, and fuses
• Network cabling
Please refer to Accessories (Section 10) for suggested third-party cable vendors.
A connectivity kit can be purchased for the rc_visard. It contains an M12 to RJ45 network cable, 24 V power
supply, and a DC plug to M12 power adapter. Please refer to Accessories (Section 10) for details.
Note: The connectivity kit is intended only for initial setup, not for permanent installation in industrial envi-
ronment.
The following picture shows the important parts of the rc_visard which are referenced later in the documentation.
Mounting interface
Power
connector
Ethernet
connector
LED
Cooling fins
Left camera
Right camera
Fig. 3.1.1: Parts description
10