Technical Specs

2 Safety

Warning: The operator must have read and understood all of the instructions in this manual before handling

the rc_visard sensor.

Note: The term “operator” refers to anyone responsible for any of the following tasks performed in conjunction

with rc_visard:

• Installation

• Maintenance

• Inspection

• Calibration

• Programming

• Decommissioning

This manual explains the rc_visard’s various components and general operations regarding the product’s whole

life-cycle, from installation through operation to decommissioning.

The drawings and photos in this documentation are representative examples; differences may exist between them

and the delivered product.

2.1 General warnings

Note: Any use of the rc_visard in noncompliance with these warnings is inappropriate and may cause injury

or damage as well as void the warranty.

Warning:

• The rc_visard needs to be properly mounted before use.

• All cable sets need to be secured to the rc_visard and the mount.

• Cords must be at most 30 m long.

• An appropriate DC power source must supply power to the rc_visard.

• Each rc_visard must be connected to a separate power supply.

• The rc_visard’s housing must be grounded.

• The rc_visard’s and any related equipment’s safety guidelines must always be satisﬁed.

• The rc_visard does not fall under the purview of the machinery, low voltage, or medical directives.