Technical data

10
ELECTRICAL CONNECTION
- Connect the appliance cord to a 10/16 A standard grounded power outlet (2 pins +
earthing pin), preferably located above the hood.
- If the power outlet is not permanently accessible, a 3-pole switch will have to be
provided in the installation with a minimum contact opening of 3 mm.
- The installation shall comply with standard NF C 15.100.
TECHNICAL DATA
Power supply voltage 230 V - 50 Hz
Total connection power 350 W
Motor 2 x 135 W
Lighting 2 x 40 W
Number of speeds 3
Evacuation duct diameter 100 or 120 mm
Hood width 598 mm
Hood depth 270/360 mm
Hood height 350 mm
This hood complies with EEC directives 76.889 and 82.499 related to
radioelectric disturbances (ordinance dated August 19th 1985 published in
Official journal date September 1st 1985)