Operation Manual

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the

chimney using either a flexible or rigid pipe the choice of which

is left to the installer.

To install a ø 150

• To install the dumper 10a ø 150.

• Fix the pipe using the pipe clamps 25 provided.

To install a ø 120

• To install a ø 120 mm air exhaust connection, insert the re-

ducer flange 9 on the dumper 10a.

• Fix the pipe using the pipe clamps 25 provided.

• Remove any activated charcoal filters.

ø 120

10a

ø 150

Recirculation version air outlet

• Fix the connection 15 to the frame using the 4 screws pro-

vided.

• Fix the flange 10 to the lower opening of the connection 15.

• Connect the hood air outlet to the flange in the lower part of

the junction using a rigid or flexible ø 150 tube (by installer’s

choice).