Specification Sheet

When the robot is in abnormal state, the host button is solid red or breathing

red, accompanied by different voice alarms. Please refer to the following

table to check the cause of the fault.

If the above solution does not solve the problem, please check suggestion

below:

1. Press the power switch on the side of the robot and restart the machine.

2. If you can't solve the problem after re-starting the robot, please contact

our customer service.

Short Prompt tone

Long prompt tone

1 beep

Reason Solutions

The wheel gets stuck Remove the obstacle

2 beeps Infrared bumper stuck Remove the obstacle

3 beeps Dirty visual sensor Clean the visual sensor

4 beeps The side brush gets stuck Remove the bostacle

1 beep The robot get stuck

Remove the obstacle

and restart it

Battery broken Contact us for helps

3 beeps Low battery power Charge the robot

4 beeps Abnormal fan Contact us for helps

1 beep

2 beeps

3 beeps Dust bin uninstalled Install dust bin again

Robit V7S Pro

Robot Vacuum Cleaner Trouble Shooting