User Manual R3000 Robot Vacuum Cleaner
Table of Contents Important Safety Instructions ......................................................P2-P4 About Your Robit R3000 Robot ...................................................P5-P8 Package Contents ...........................................................................P5 Product Diagram .............................................................................P6 Specifications ..................................................................................
Important Safety Instructions To reduce the risk of injury or damage, please kindly read these safety instructions before using, and carefully keep it for further reference. Cautions 1.1 Please use this product according to the instructions. Any operation that is not in accordance with this manual may cause damage to this product. 1.2 The product cannot be operated and used by children under 8 years old or mentally impaired people.
Dangerous 2.1 Do not use the product in an environment with open flames or fragile items. 2.2 The working temperature range is -10℃ - 50℃, do not use it in low temperature or high temperature environment. 2.3 Please do not place the hair, clothes, fingers and other parts of the human body near the openings and moving parts of the product. 2.4 When in suction mode, do not use the product in a wet or stagnant environment. 2.
Cautions 4.1 Before cleaning and maintaining the product, be sure to unplug it from the power outlet and turn off the power switch. 4.2 Do not allow the robot to inhale liquids such as water, otherwise the product may be damaged. 4.3 Do not disassemble the battery of this machine without permission. 4.4 Please clean up the tangled hair on the universal wheel and side brush in time. 4.
About Your R3000 Robot Vacuum Cleaner Package Contents Robit R3000 Charging Base Remote Control Adapter Cleaning Brush Roller Brush 9 Side Brushes Filter Dust Collector Product Diagram Host chart ON/OFF 5
Infrared Receiving Sensor Downward Sensor Electrode Contact Pins Universal Wheel Side Brushes Electrode Contact Pins Side Brushes Downward Sensor Battery Cover Driving Wheel Downward Sensor Driving Wheel OFF ON/OFF Roller Brush Dust Collector Charging Dock Signal Emission Area Charging Indicator Electrode Contact Pins 6
Remote Contorl Display Auto Cleaning Mode Back to Charge Direction and Time Setting ON/OFF Clock Setting Spot Cleaning Mode Single Room Cleaning Mode Reservation Cleaning Edge Cleaning Mode Choosing Suction (Under Single Room Cleaning and Auto Cleaning Mode) NOTE: Install a pair of AAA batteries before using the remote control for the first time, please make sure the polarity of the battery is installed correctly.
Instruction of indicator light LED indicator Status Breathing Orange Charging Solid Blue Stand by/ Cleaning/ Fully Charged Light off Power Off When the product is not on the charging base and inactive within 5 minutes, the indicator light will automatically turn off Solid Orange Low Power/ Searching Charging Dock Breathing Red or Solid Red The robot has a problem Using Your R3000 Robot Note Before Use 8
Remove the power cords and small objects from the floor that may entangle the robot. The robot can cross the floor of 0.59inch/ 15mm heights and 15° inclination, but it is not suitable for long-pile carpet. It is recommended to use on the floor, tile and thin carpet. (Thinner than 0.3inch/ 0.8mm) Keep the robot away from space lower than 2.4inch/ 80mm to prevent it from being stuck. R3000 robot has anti-drop sensors to prevent it from falling down from heights.
Connect the plug of the adapter to the power socket of the charging base, and the other end to the wall socket. Reminders: Make sure that the * Warm charging base is on when the power is turned on, otherwise, the product cannot be automatically recharged.
Operations Guide Start Cleaning Press the once to activate the host. Press the on the host or the on the remote control to start automatic cleaning. AUTO Stop Cleaning Press the on the host or the on the remote control to pause the robot vacuum being cleaned. If you want to continue cleaning, press the on the host again or the on the remote control. Power Off Press the until the light of the host goes out.
Cleaning Mode Automatic Cleaning Mode Press the on the main unit or the on the remote control to start automatic cleaning. If the battery is low before the cleaning is completed, the host will return to the charging base for charging. AUTO Reminder: During the recharging process, * Warm there may be a phenomenon that the charging base cannot be found. At this time, the host will flash a red light and beep for four times. Please put the host manually into the charging base for charging.
Max. Suction Cleaning Mode In the automatic cleaning/single-room cleaning mode, by pressing the on the remote control, the main unit can increase the suction force power and perform deeper cleaning at the maximum suction force. Vacuum suction function is off by default. Edge Cleaning Mode Press the on the remote control and sweep along the edges to ensure sweeping along the walls and around the furniture legs. Single Room Cleaning Mode When a specific room needs to be cleaned, press the remote control.
Time and Schedule Cleaning The host can make schedule settings for the cleaning time. The schedule timing function can only be realized by the remote control. Before making the schedule timing, please ensure that the time of the remote control is consistent with your local time. When you set the clock or the schedule, please make sure that the remote * Tips: control is close to the machine. Remote Control Display Time Setting Press the on the remote control. The setting in the time display starts to flash.
Scheduled Cleaning Setting Press the on the remote control, and then start showing one hour in the display to set the cleaning schedule. Press the or to select the minute or hour setting. Press the or to set the desired time. Press the again, when the cleaning plan setting is completed, the machine will emit a beep. Cancel Scheduled Cleaning Press the on the remote control for about 4 seconds. When the scheduled cleaning plan is canceled, the machine will make a beep.
Clean Dust Box 2 1 1. Press the dust box release button to remove it. 2. Open the lid of the dust box to empty it. Clean Filter 2 1 1. Pull the white label to remove the filter. 2. Shake off the dust on the filter.
Clean Side Brushes, Roller Brushes, Universal Wheels and Sensors 1. Remove the roller brush and clean the dust suction channel with a cloth. 2. Clean the roller brush. Remove the hair from the roller brush with the cleaning tool provided. 3. Remove the side brush. Clean the side brush with a cloth. 4. Clean the universal wheel with a cleaning brush. 5. Use a cleaning brush to clean the dust on the sensor to ensure the best performance.
Trouble Shooting When the machine breaks down, the red LED will flash or be always on when the LED is broken, and it will be accompanied by a beeping sound. Please refer to the following sounds and light flashing tips to solve the problem of the robot vacuum. If you still can't handle it, please contact our customer services at any time. * Tips: For some faults, you can solve the problem by restarting the machine.
Prompt Solution The host cannot be activated 1. Make sure the main switch at the bottom of the host is turned on 2. Make sure the battery is fully charged 3. Replace the remote control with a pair of AAA batteries 4. Make sure the distance between the remote control and the host is 0-5 meters 5. If the problem is not resolved, turn off the main switch at the bottom of the host, and then turn it on again Remote control fails 1. Replace the new battery and install it correctly 2.
Robit Customer Care Ultra-long Warranty Promise from Robit 30-day money back guarantee for ANY reason for 30 days after the date of purchase. Return your undamaged Robit product and receive a full refund for ANY reason. 12-Month Limited Product Warranty for quality-related issues. For 12 months after the date of purchase, we deal with all quality related issues with a replacement or a limited refund. Warm Tip: Be sure to use your product as directed.
