User Manual

12
Flushing the Hoses
Ifthenextvehicletobeservicedcontainsa
differenttypeofoilthanthepreviousvehicle
serviced,itisrecommendedthattheservicehoses
beushedofresidualoiltopreventcontamination.
1.Connecttheservicehosestotheunit’sstorage
portconnections(showninFigure7).
2.Openthecouplervalvesbyturningthecollars
clockwise.
3.SelectHOSE FLUSH.Theunitdisplays
HOSEFLUSHCLEARSTHESERVICEHOSES
OFOILSOTHATAVEHICLEWITHANOTHER
OILTYPECANBESERVICED.
PLACEBOTHSERVICEHOSESONTO
STORAGEPORTSANDOPENSERVICE
VALVES.
PRESSSTARTTOBEGINFLUSH
OREXITTOABORT.
4.SelectSTART tobeginthehoseushprocess,
whichisprogrammedtorunforthree(3)
minutes.
5.Whenthehoseushingprocessiscompete,the
displayreads
HOSEFLUSHCOMPLETE
PRESSEXIT
6.Closethecouplervalvesbyturningthecollars
counterclockwise,andselectEXIT.
Figure 7
Storage
Port
Connections
Operating Instructions