User Manual

9
554228 Rev. E July 30, 2013
4.PressSTARTtobeginllingtheinternalstorage
vessel.Addatleast8lbs.ofrefrigerantto
ensureenoughisavailableforcharging.
 Thisprocesstakes15–20minutes.The
unitstopswhenthedesignatedamountof
refrigeranthasbeentransferredtotheinternal
tank,orwhenthesourcetankisempty.
Note: Only the amount of refrigerant available for
charging is displayed. For example, if the tank ll
default is set at 15 lbs., the unit will transfer 15 lbs.
to the ISV, but the display may show only 13 lbs.
5.Whenthellprocessiscomplete,theunitis
readyforoperation.
Note: There is no need to calibrate the scale; it is
calibrated at the factory.
Manual Tank Fill contd.
Setup
Edit Print Header
Thismachinehasthecapabilitytoprintout
recovery,vacuum,charge,andushinformation
foreachvehicletested.
Theprintheaderinformationthatisentered
duringthisprocedurewillappearoneachprintout.
Respondtothequestionsonthedisplayscreenby
using
• thekeypadtoenterinformation,
• theleftandrightarrowkeystomovethecursor,
• thedownarrowtoclearinformation.
1.Enteryourdealershipnumber,andyour
dealershipname,streetaddress,state,andzip
code.
2.Fourmorelinesareavailableforyoutospecify
otherinformationtoappearoneachprintout.
OnceatesthasbeencompletedandthePRINT
keyhasbeenpressed,enterthevehicle'sVINand
licenseplatenumber.
Entering Information
Thenumericalkeysonthekeypadinclude
analphabetthatisusedtoenterinformation
intothemachine.Theprocedureissimilar
totextmessaging.Forexample,
To enter an “A”:
Pressthe2keyonce
toseethe“A”onthe
digitaldisplay.
To enter a “2”:
Pressthe2keyfour
timestoseethe“2”
onthedigitaldisplay.
Note: After the
appropriate letter is
shown on the display,
pause for a moment
until the cursor
moves to the next
position.
Operating Tips