User Manual

5
539602 Rev. H June 11, 2013
Setup
Unpack the Accessory Kit
Unpacktheaccessorykitfromthebag,andremovethe
plasticpackaging.Thekitconsistsof
• Acalibrationweight.
• Vacuumpumpoil,oilllercap,andtube.
• Plasticpouchcontainingawarrantycard(tobe
completedandmailed),applicableMSDSsheets,a
servicecenterlisting,andanenvelopeofMobileAir
ConditioningSociety(MACS)information.
Important: You must complete and mail the MVAC
Certication Form and your technicians must be
certied with the Environmental Protection Agency
(EPA) to operate this equipment.
Power Up the Unit
1. Unwind the power cord from the handle, and plug it
into a correct voltage outlet. See Figure 1.
2.Turnonthemainpowerswitch.Thersttimetheunit
ispoweredup,itdisplaystheinitialsetupmode.
Select a Language – English
Seleccionar Idioma – Espanol
Selection Langue – Francais
Theoperatormaychoosetohavepromptsdisplayedin
oneofthreelanguages:English,Spanish,orFrench.
1. UsetheUP or DOWN arrow key to toggle through
thechoicesforEnglish,Spanish,orFrench.Referto
Figure 2.
2. PressSTART / YEStoselectthedisplayedlanguage.
Select Operating Units
Theoperatormaychoosetohavetestresultsdisplayed
inImperial(lb.,orlb.andoz.)orMetric(kg)units.
1.UsetheUP or DOWN arrow key to toggle through
choicesforIMPERIAL UNITS or METRIC UNITS.
2.PressSTART / YEStoselectthedisplayedoperating
unit choice.
CAUTION: R-134a systems have special
ttings (per SAE specications) to avoid
cross-contamination with R-12 systems.
DO NOT adapt your unit for a different
refrigerant — system failure will result.
Arrow
Keys
Start / Yes
Button
Figure 2
Stop / No
Button
Power
Cord
Main
Power Switch
Figure 1