User Manual

10
Operating Instructions
Flushing the Hoses
Ifthenextvehicletobeservicedcontainsadifferent
typeofoilthanthepreviousvehicleserviced,the
hosesmustbeushedofallresidualoiltoprevent
contamination.
1. PresstheMENU button on the keypad.
2. PresstheUP or DOWNarrowkeytoscrollto
HOSEFLUSH,andpressSTART / YES.
3. Connectthehosestotheunit’sstorageport
connections(showninFigure6),andopenthe
couplervalves.
4. Select START / YES tobeginthehoseush
process.
 Thedisplaywillread
FLUSH COMPLETE
CONNECT SERVICE
HOSES TO VEHICLE
START TO CONTINUE
5. ClosethecouplervalvesandpressSTART / YES.
6. PressSTOP / NO toexittheHOSEFLUSHmenu.
Storage Port
Connections