User guide

5
560826 Rev. D, August 23, 2013
Setup
Unpack the Accessory Kit
Unpacktheaccessorykitfromthebag,and
removetheplasticpackaging.Thekitconsistsof
• Acalibrationweight.
• Vacuumpumpoil,oilllercap,andtube.
• Plasticpouchcontainingawarrantycard(to
becompletedandmailed),applicableMSDS
sheets,aservicecenterlisting,andanenvelope
ofMobileAirConditioningSociety(MACS)
information.
Important: You must complete and mail
the MVAC Certication Form and your
technicians must be certied with the
Environmental Protection Agency (EPA)to
operate this equipment.
Power Up the Unit
1. Unwindthepowercordfromthehandle,and
plugitintoacorrectvoltageoutlet.SeeFigure
1.
2. Turnonthemainpowerswitch.Thersttime
theunitispoweredup,itdisplaystheinitial
setupmode.
Select a Language – English
Seleccionar Idioma – Espanol
Selection Langue – Francais
Theoperatormaychoosetohaveprompts
displayedinoneofthreelanguages:English,
Spanish,orFrench.
1. UsetheUPorDOWNarrowkeytotoggle
throughthechoicesofEnglish,Spanish,or
French.RefertoFigure2.
2. PressSTART / YEStoselectthedisplayed
language.
Select Operating Units
Theoperatormaychoosetohavetestresults
displayedinImperial(lb.,orlb.andoz.)orMetric
(kg)units.
1. UsetheUPorDOWNarrowkeytotoggle
throughthechoicesofIMPERIALUNITSor
METRICUNITS.
2.PressSTART / YEStoselectthedisplayed
operatingunitchoice.
Arrow
Keys
Start / Yes
Button
Figure 2
Stop / No
Button
Power
Cord
Main
Power Switch
Figure 1
CAUTION: R-134a systems have
special ttings (per SAE specications)
to avoid cross-contamination with R-12
systems. DO NOT adapt your unit for a
different refrigerant — system failure
will result.