User guide

10
Replenish A/C System Oil
Oilmaybereplenishedafterthechargecycleby
usinganoilinjecttool.Useseparateoilinjecttools
forPAGandPOEsystemstopreventoilcross-
contamination.
CAUTION : To prevent damage to equipment,
• Use only NEW oil to replace the oil removed
during the recycling process.
• Charge only the amount of oil that was
removed from the A/C system during the
recovery process. If no oil was removed from
the A/C system during recovery, DO NOT
charge any oil into the A/C system.
EmptytheoildrainbottlebeforerecoveringanA/C
systemtopreventaninaccurateoilcharge.
1.Refertothevehicleservicemanualto
determinethecorrectoilfortheA/Csystem
beingserviced.
2.Checktheoildrainbottletodeterminethe
amountofoilthatwasremoved.SeeFigure6.
3.Followinstructionsincludedwithyouroilinject
tool.
Operating Instructions
Figure 6
Oil Drain Bottle