Specifications

General Tools
HVAC
29
General Tools
HVAC
30
Punch & Chisel Set
4600
• Durable set of heat-treated chrome
vanadium steel punches and chisels.
Storage tray included.
• Set Includes, (also available
separately):
3 – Cold chisels (with gauge):
3/8" x 5-1/2"; 1/2" x 6"; 5/8" x
6-1/2"; 2 – Center punches: 1/8"
x 5"; 3/16" x 6"; 5 – Pin punches:
3/32" x 4-1/4"; 1/8" x 4-3/4";
5/32" x 5"; 3/16" x 5-1/4"; 1/4"
x 5-3/4"; 5 – Taper punches:
3/32" x 5-1/4"; 1/8" x 5-3/4";
5/32" x 6"; 3/16" x 6-1/4";
1/4" x 6-3/4".
Brass Hammer and Punch Set
4606
• Brass-head hammer and punches
are ideal to use where sparks from
ferrous metals would be hazardous,
or where precision metal parts could
be damaged by steel tools.
• Hammer head weighs 24 oz.; brass
drift punch is 10" x 3/4" diameter;
brass tapered punch is 8" x 5/8" hex
tapered to 3/8" diameter point.
Punch & Chisel Set
4605
• Safety protective handle allows easy
grip and protects hand from being hit
by hammer.
• 12 punches and chisels included:
5 flat chisels: 1/2", 5/8", 3/4",
7/8", and 1" wide blades.
1 cape chisel: 1/4" wide blade
2 taper punches: 1/8" and
1/4" diameter.
2 pin punches: 3/16" and
1/4" diameter.
2 center punches: 1/8" and
3/16" diameter.
• Double locking ball detent holds
punch or chisel securely in the
driver handle.
Scraper Set
4550
• Scrapers feature polished,
heat-treated, stiff, stainless steel
blades. Handles are ergonomic
two-component plastic and feature a
non-slip grip and steel bolstered end.
Packaged in a storage tray.
Includes: 1-1/4" straight blade,
1-1/4" bent blade, and 2"
straight blade.
Mirror and Magnet Set
4650
• Handles telescope from 6-1/2" to
25". Swivel heads allow access to
tight areas.
• Large, rectangular swivel mirror
is 2" x 3-1/2", and is attached
to one telescoping handle; small
mirror is 1-1/4" in diameter, and is
interchangeable with magnets on the
other handle.
• Magnets can lift up to 8 lbs.
3/8" Impact Driver
4608
• Loosens hard-to-turn screws, bolts
or nuts.
• Handle design prevents possibility
of hitting hand with hammer when
striking impact driver.
• Bit holder has 3/8" drive and 5/16"
hex for Phillips and flat
screwdriver bits.
• Includes eight screwdriver bits:
No. 2 Phillips bit, 1-3/8" long with
5/16" hex.
No. 2 Phillips bit, 3-1/8" long with
5/16" hex.
No. 3 Phillips bit, 1-3/8" long with
5/16" hex.
No. 3 Phillips bit, 3-1/8" long with
5/16" hex.
5/16" wide x 1-3/8" long with
5/16" hex slotted bit.
5/16" wide x 3-1/8" long with
5/16" hex slotted bit.
3/8" wide x 1-3/8" long with
5/16" hex slotted bit.
3/8" wide x 3-1/8" long with
5/16" hex slotted bit.
1/2" Impact Driver
4607
• Loosens hard-to-turn screws, bolts
or nuts.
• Handle design prevents possibility
of hitting hand with hammer when
striking impact driver.
• Bit holder 1/2" drive and 5/16" hex
for Phillips and flat screwdriver bits.
• Includes eight screwdriver bits:
No. 2 Phillips bit, 1-3/8" long with
5/16" hex.
No. 2 Phillips bit, 3-1/8" long with
5/16" hex.
No. 3 Phillips bit, 1-3/8" long with
5/16" hex.
No. 3 Phillips bit, 3-1/8" long with
5/16" hex.
5/16" wide x 1-3/8" long with
5/16" hex slotted bit.
5/16" wide x 3-1/8" long with
5/16" hex slotted bit.
3/8" wide x 1-3/8" long with
5/16" hex slotted bit.
3/8" wide x 3-1/8" long with
5/16" hex slotted bit.
Screw Extractor Set
4651
• Removes broken studs and bolts.
• Includes ten guide bushings, five drill
bits and five screw extractors with
extractor nuts.
• Drill bits are left handed to
help removal.
Blue Force — Handled
Pry Bar Set
• Finally, a heavy-duty pry bar made
of tempered.
• square steel that you can hit without
damaging the handle.
• Black chrome striking cap allows
hitting the bar without damage to
the handle.
• Ergonomic handle – dual durometer
composite handle for user comfort;
reduces hand fatique.
• Polished tip with black oxide finish.
• Long-life finish resists rust and wear
during use.
8203
• Set includes 12", 18", and 24" bar
shank lengths packaged in a gray
molded tray.
8206
• Set includes 8", 12", 18", 24", 32"
and 36" bar shank lengths packaged
in a gray molded tray.
Heat Gun
14450
• Direct heat source with three settings
– 500º F/750º F/Air-only.
• Lightweight, shock-proof & cool
running with tough Lexan® housing.
• Fast heating/drying of materials.
• Quick curing/drying of epoxies.
• Applying shrink tubing.
• Softening tubing for bending.
• Speed-drying of touch-up paint to
eliminate "haze".
• Drying out condensation in motors,
clutches, controls, etc.
• 115V 50/60 Hz.
• Made in USA.
Cordless Rechargeable
30-LED Light
16440
• Cordless: freedom to move and work
anywhere anytime without worrying
about tangled cords.
• Rechargeable: One-hour recharge
time provides up to 8 hours of
continuous operation.
• 30 LED: 30 Super-bright, long-life
LEDs provide forward directed pure
white light. LEDs produce very
little heat, therefore eliminating the
possibility of burns to the Technician
or components.
during continuous use.
• Ergonomic: Slim design (1-7/8")
diameter allows access into
tight areas.
• International versions: 220V,
50/60Hz - European, Australian
and UK version.
• Made in USA.