Specifications

ManualsBrandsRobinair ManualsConsumer electronics17801B

General Tools

HVAC

General Tools

HVAC

Wire Stripper & Cutter

4499

• Only 6" in length. Clean size

separations and markings allow ease

of use in tight areas.

• Strips insulation off of electrical

wires ranging from 10 AWG—22

AWG (0.6mm—2.6mm) in diameter.

Heat-treated steel construction with

durable grips.

• Spring-loaded jaws stay open for

ease of use, and lock for storage;

gripping area at tip of jaws for

working in tight areas, wire cutter

at base of jaws.

Ratcheting Terminal Crimper

4497

• Heavy-gauge steel crimping tool

designed for insulated wire terminals.

• Ratcheting action crimps terminal to

correct tightness on the wire, making

crimping fast and easy.

• Insulated handles with compound

mechanical leverage for power.

• For wire sizes: AWG 22-18 (0.6mm—

1.0mm) red terminal; AWG 16-14

(1.3mm –1.6mm) blue terminal;

AWG 12-10 (2.0mm—2.6mm)

yellow terminal.

7-in-1 Wire Stripper & Crimper

4498

• Strips insulation off electrical wires

ranging from 10 AWG—22 AWG

(0.6mm—2.6mm) in diameter. Pliers

on tip of jaw for looping or grabbing

wire in tight places.

• Heat-treated steel jaws cut solid or

multi-strand wire.

• Screw cutter shears screws clean,

with no thread clean-up required.

Works on machine screw sizes 4-40,

5-40, 6-32, 8-32, 10-24, and 10-32.

• Crimps insulated and non-insulated

wire terminals, 7mm—8mm spark

plug wire connectors.

Hose Clamp Plier Set

4502

• Includes a cross-slotted jaw pliers

and a wide, ﬂat-band hose

clamp pliers.

• Services most ring-type or ﬂat-band

hose clamps.

• The clamps are held open with a

ratchet locking mechanism. Jaws

swivel to access hose clamps in

any position.

Bushing Driver Set

4505

• Enables you to remove and install

bushings ranging from 3/8" to

1-3/8" in diameter, # Includes: Large,

medium, and small driver handles

with nuts; sixteen bushing adapters

ranging from 3/8" to 1-3/8".

• Housed in a blow-molded

storage case.

Bearing Race & Seal Driver Set

4507

• Permits installation of tapered

bearing races & seals w/o damage

to the component or housing.

Includes a driver handle plus popular

bearing and seal drivers, ranging

from 1.565" to 3.180".

• Tapered side of driver is used to

install races. Invert the driver to

the ﬂat side to install seals. Set is

housed in a blow-molded plastic

storage case.

• Includes driver handle and tool sizes:

1.565", 1.750", 1.965", 2.325",

2.470", 2.555", 2.830", 2.995",

and 3.180".

1023

Hydraulic Bottle Jacks

• Jacks can be used in vertical or

horizontal positions.

• Fewer working parts, extremely

smooth bearing surfaces and close

tolerances ensure long life.

• Oil bypass system prevents the lifting

ram from being over-extended.

Length Height Pump Strokes to

Cap. OTC Retracted of Screw with Screw Extend Piston Saddle Carry

(tons) Stroke No. Height Min. Extension Extended One Inch Dia. Base Size Handle Weight

4 6-

3/4"

4304A 7-

5/8"

3/8"

14-

5/8"

9 1-

1/8"

5/8"

x 3-

7/8"

No 7 lbs.

8 6-

3/4"

4308A 9

1/4"

18-

1/2"

13 1-

3/8"

1/8"

x 4-

3/4"

Yes 13 lbs.

12 6-

3/4"

4314A* 6-

1/16"

5/8"

11-

1/8"

16 1-

1/2"

1/4"

x 5-

3/8"

Yes 13 lbs.

20 6-

3/4"

4322A* 6-

3/8"

11-

1/4"

26 1-

3/4"

x 6

3/8"

Yes 19 lbs.

Low profile models

Mechanical

Grip-O-Matic Puller

1023

• 2-ton, 2/3-jaw, 1 Lb. ; 5 Oz

(Reversible Jaws).

• Forged from quality steel, heat

treated, and subjected to rigorous

tests which exceed its rated capacity.

1025

• 2-ton, Long 2-Jaw; 21 lbs.

(Reversible Jaws).

Straight-Blade Hose Cutter

4509

• Cuts rubber hoses ranging from

1/4" to 1-1/2".

• Simply place hose in tool and

squeeze handle to cut.

.090" tip - straight pliers .047" tip - straight pliers

.090" tip - 90° pliers .047" tip - 90° pliers

.070" tip - straight pliers .038" tip - straight pliers

.070" tip - 90° pliers .038" tip - 90° pliers

.047" tip - straight pliers Straight tip pick 90° tip pick

Hose Pinch-off Pliers Set

4510

• Shuts off ﬂow through vacuum lines,

fuel lines, coolant lines, etc.

• Cocking ratchet mechanism holds

pivoting jaws tightly in place. Heavy-

duty swivel jaws pivot to assure

parallel pinching.

• Contents of set:

8" for small hoses and tight areas

10" for radiator and vacuum lines

12" for radiator and vacuum lines

"Guillotine" Hose Cutter Tool

4511

• Hooks and cuts plastic lines and

rubber hoses from 1/8" to 1"

diameter. Simply hook hose in

V-shaped end, and squeeze handle to

cut. Compound mechanical leverage

provides power. Spring-loaded blade

returns to open position after use, so

blade is not exposed.

• Linear design with hook feature

reaches, grabs, and cuts hoses in

tight areas.

Snap Ring Pliers Set

4512

• For internal or external snap

rings; thumbscrew permits quick

conversion.

Made of heavy-gauge tempered

steel. Also includes two stainless

steel handled picks.

• Contained in a blow-molded plastic

storage case.

• Contents of Set:

Mini Snap Ring Plier Set

4514

• Small-size pliers for work in

tight areas.

• Service S-ring and R-ring clips,

internal or external, straight or

angled. Ruggedly built of heat-

treated chrome molybdenum steel.

• Set includes two internal snap ring

pliers (one straight, one 45°) and

two external snap right pliers (one

straight, one 45°).

• All pliers have .038" (1.0mm)

diameter tips.

Brass Punch Set

4602

• Two large, brass non-sparking

punches. Ideal for use near precision

parts or in locations where sparks

from ferrous metal could be

hazardous.

• Includes an 8" punch (5/8" hex,

tapered to 3/8") and 10" straight

punch (3/4" dia., chamfered at

both ends).

Mini Pick & Hook Set

4515

• Sturdy stainless steel points and

shafts designed for marking,

removing o-rings, accessing snap

rings, and performing other tasks.

Assorted angle tips allow you to

reach awkward locations.

• Knurled shaft design enhances ﬁnger

control for delicate jobs.