Specifications

CHECKING FOR LEAKS

Every three months, or as specified by local or state laws, you should check your unit for

leaks. As with any mechanical equipment, general use, moving the unit and vibration can

cause fittings to loosen.

1. Turn off the MAIN POWER switch, and disconnect the power cord from the

outlet.

2. Remove the door access screws from the right side of the unit. Open the door.

3. Use a leak detector to probe all fitting connections for refrigerant leaks. Tighten

fittings if a leak is indicated.

4. Close the door and replace the door access screws.

Important:

Inspect

the unit

periodi-

cally for

leaks. The

manufac-

turer

does not

reimburse

for lost

refriger-

ant!

Maintenance Procedures

Diagram of Unit’s Components — Side Views

INST0918

Pressure/Temperature Chart

Door Screw

System Oil

Drain Valve