Specifications
http://www.ppwatt.com
Tweed 5E3 PCB Valve Junior Conversion
Build Manual v3.0 13 Feb 2011
25 of 40
7.1.10 Install the Remaining Components
Install, solder and trim all of the remaining components in the circuit.
Refer to the latest
version of the schematic
or chassis layout
drawing on PPWatt.com
in the FAQ, the Tweed
5E3 PCB, and/or the
component package to
identify, locate and
position component
values.
If you have one of the
first batch of PCBs
(version 3.3) there is a
labelling error to two of
the components in the
bottom left.
No certain order needs
to be followed.
I generally do the
FRXSOLQJFDSVQH[W,W¶V
just a haELW,¶PLQ
N.B. C8 & C9
± the tone
control caps
are not
installed on the
PCB. They
are attached
between the
Tone &
Volume Pots.
Then do the
power resistors