Install Instructions

14
INSTALLER SETUP MENU
Filter Change
Reminder
Room
Temperature
Calibration
Minimum
Compressor
On-Time
This setting will ash FILT in
the display after the elapsed
run time to remind the user
to change the lter. The OFF
setting will disable this feature.
This setting allows the installer
to change the calibration of
the room temperature display
so that, for example, the
thermostat would read 72°F
instead of 70°F.
The installer can select the
minimum run time for the
compressor to help protect the
compressor from short-cycling.
The lter change reminder
can be adjusted from OFF
to 2000 hours in 50 hour
increments. Press the
second button from the top
left side of the thermostat
to display the current lter
elapsed run time.
The room temperature display
can be adjusted to read 3°
above or below the factory
calibrated temperature.
The minimum compressor
run time can be adjusted
from OFF to 3, 4, or 5
minutes. If 3, 4, or 5 is
selected, the compressor
will run for at least the
selected time before
turning off (although the
fan may continue to run
for a short time).
OFF
OFF
0
Next step
Prev step
Next step
Prev step
Next step
Prev step
Display Adjustment OptionsSettings
Default