Specifications

Custom Logo Program • Instructions
1. Read entire Custom Logo Request Form prior to completing it:
• If you do not understand something, contact y
our ICM representative
• ANY modifications to a previous
“signed off” logo require a new request form
2. Completely fill out request form:
• Print appropr
iate information in blank spaces on form
• Pa
y special attention to check boxes
• If you are choosing a f
ont from the Sample Font Page, make sure the font number appears in the
appropriate box on the form (lower left)
• DO NOT send in P/O with initial request form (i.e.: on fax cover page)
3.
It is especially important to note that y
ou should contact the customer’s graphics company to get a
properly formatted logo emailed to ICM. Contact the graphics company and review with them items
1-6 under “Graphics Specifications” on the Custom Logo Request Form. They will understand the
terminology.
4.
Get a commitment from the gr
aphics company as to when the graphic will be emailed to ICM. Note
this date on the request form and follow up to verify the logo was sent by the graphics company and
received by ICM.
5.
If the gr
aphics company charges a fee to transmit the logo to ICM, the customer is responsible for
that fee.
6.
If the “Accommodations ha
ve been made...” box was checked under Logo Origin, and no logo is
submitted, there will be no completed thermostats.
7. Fax in completed request form and a clean/enlarged copy of the customer’s logo, and be sure the
logo is exactly what the customer wants; if there is something on the logo that will not go on the
thermostat, please cross it off.
8. The finished drawing will be assigned a logo number that will begin with the letter “L”. Reference
this number on your purchase order AFTER you receive the drawing;
• Failure to ref
erence this “L” number on your P/O may result in the customer receiving blank
thermostats. New covers with new logo are $3.75 each
• Referencing an incorrect or outdated logo n
umber will result in wrong covers
9.
Sign offs with purchase orders are expected within 10 da
ys of the drawing’s completion. Both signed
off drawing and purchase order (referencing a specific “L” number) must be faxed to ICM to complete
the order. Failure to submit one or the other will cause delays.
SimpleComfort® Custom Logo Thermostats
Ordering Recommendations
315.233.5266
Phone
All features and specifications subject to change without notice.
Customer Service Fax
315.233.5282
Application Assistance
800.365.5525
Visit www.icmcontrols.com to find all
of our latest products, sell sheets and wiring diagrams
54