Specifications
Fan Coil Thermostats
ICM Control Features and Applications Specifications Terminations
SC700LV/SC700V
• 4 pipe heat/cool
• 3 speed fan
• Auto changeover
• 24 VAC (SC700LV) and 120-240 VAC (SC700V) versions available
• Remote room temperature sensor (Optional: Order ACC-RT103)
• Horizontal model available
• UL Listed
• Temperature Control Ranges:
• 45°F to 90°F, Accuracy:
±
1°F
• 7°C to 32°C, Accuracy:
±
.5°C
• System Configurations:
• Fan coil thermostat, 4 pipe; 3 speed fan
N/A
SC710LV/SC710V
• 4 pipe heat/cool
• 3 speed fan
• Manual changeover
• 24 VAC (SC710LV) and 120-240 VAC (SC710V) versions available
• Remote room temperature sensor (Optional: Order ACC-RT103)
• Horizontal model available
• UL Listed
• Temperature Control Ranges:
• 45°F to 90°F, Accuracy:
±
1°F
• 7°C to 32°C, Accuracy:
±
.5°C
• System Configurations:
• Fan coil thermostat, 4 pipe; 3 speed fan
N/A
SC900V
• 2 or 4 pipe • 3 speed fan
• Pipe sensor for seasonal
changeover
• 24 VAC and 120-240 VAC
versions available
• Manual or auto changeover
• Selectable °F or °C
• Occupancy sensing compatible
• Valve purge timer
• Remote room temperature sensor
(Optional: Order ACC-RT103)
• Large backlit display
• Icons for fan and outputs
• Permanent memory
• Key pad lockout function
• Maximum heat/minimum cool set
point limits
• Soft touch controls
• Temperature Control Ranges:
• 45°F to 90°F, Accuracy:
±
1°F
• 7°C to 32°C, Accuracy:
±
.5°C
• System Configurations:
• Fan coil thermostat
• 2 or 4 pipe; 3 speed fan
L, N, W/Y, Y/A, GL,
GM, GH, RS, SC,
SB, PS
SimpleComfort® Fan Coil Thermostats
When it comes to freezing cold temperatures, you can relax knowing that ICM’s Frost Sentry™ is on guard. These
low-cost thermostats are perfect for areas where protection from extreme cold is essential. Its special foam
backing improves accuracy by providing separation from the wall at installation, while sealing up any unsightly
wiring holes. This insulated backing helps eliminate the risk of “wall effect” (wall temperature causing false
temperature readings). Ideal for storage areas, garages, workshops, crawl spaces and other critical areas.
Frost Sentry
TM
Garage Thermostats
Frost Sentry
TM
Garage Thermostats
ICM Control Features and Applications Specifications Terminations
FS40
• Easy, two-wire installation
• Fixed setpoint at 40°F
• Special foam backing
improves accuracy; helps
eliminate “wall effect”
• Sleek, rugged design
• Compatible with most standard
electric heating units
• Ideal for storage areas, garages,
workshops and crawl spaces
• Input: 18-30 VAC
• Output: 2 amps max.
• Temperature setpoint: Fixed 40°F
• Accuracy: ±5°F
R, W, G
FS1500L
• Controls single stage heating
systems
• Millivolt, hydronic (water or
steam) system, gas and
electric systems
• Battery operated
• Backlit display
• Mercury-free, environmentally safe
• Remote sensor compatible
(ACC-RT104)
• Perfect for use with unit heaters
• Electrical Rating:
• 24 VAC (18-30 VAC)
• 1 amp maximum per terminal
• 2 amp maximum total load
• Easy access terminal block
• Temperature control ranges:
• 35°F to 75°F, Accuracy: ±1°F
R, W, G, S1, S2
FS1500VL
• Controls single stage heating
systems
• Millivolt, hydronic (water or
steam) system, gas and
electric systems
• Battery operated
• Backlit display
• Mercury-free, environmentally safe
• Remote sensor compatible
(ACC-RT104)
• Vertical design for easy J-box
installation
• Perfect for use with unit heaters
• Electrical Rating:
• 24 VAC (18-30 VAC)
• 1 amp maximum per terminal
• 2 amp maximum total load
• Easy access terminal block
• Temperature control ranges:
• 35°F to 75°F, Accuracy: ±1°F
R, W, G, S1, S2
315.233.5266
Phone
All features and specifications subject to change without notice.
Customer Service Fax
315.233.5282
Application Assistance
800.365.5525
Visit www.icmcontrols.com to find all
of our latest products, sell sheets and wiring diagrams
48