Specifications

Furnace Controls
ICM offers low cost, form, fit and functional replacement furnace controls for many popular OEM
models. Our furnace controls come standard with many safety features including 100% gas shutoff in
case of ignition failure.
Furnace Control Modules
ICM Control Features and Applications Specifications Replaces
ICM280
• Microprocessor-based fan blower
• Inducer fan outputs
• Hot surface ignitor output
• Flame sensor input
• Gas valve output
• Status LED for fault codes
• Twinning compatible with another ICM280 board
• Voltage: Line (98-132 VAC) @ 60 Hz
• Fan: 2 HP @ 240 VAC
• Inducer motor: 7 amps @ 250 VAC
• Gas valve: 1 amps @ 24 VAC
• Ignitor: 5 amps @ 120 VAC
• Goodman: B1809906
B1809908, B1809910
B1809913, B1809913S
• UTEC: 1012-933D
• Texas Instruments:
41F-5
• White-Rodgers:
50T35-730, 50T35-743
ICM281
• Control gas valve, ignitor, blower motor, inducer,
humidifier and air cleaner
• Microprocessor-based
• Designed for 100% gas shutoff in case of ignition failure
• Model selection of 80+ and 90+ furnace operation
• Reverse polarity protection
• Secondary brownout voltage protection
• Heating and cooling fan functions in response to
standard thermostat
• Provides diagnostic LEDs to aid in troubleshooting
• Twinning compatible with another ICM281 board
• Voltage: Line (98-132 VAC) @ 60 Hz
• Operating temperature: -40°C to 176°F
• Ignitor: 5A @ 120 VAC
• Cool blower: 30A, 2HP, 240 VAC
• Heat: 5A, 1/2 HP, 240 VAC
• Inducer motor: 4A, FLA-8.0 LRA @ 120 VAC
• Gas valve: 1.5A @ 30 VAC
• Carrier:
CES0110057-00
CES0110057-01
CES0110057-02
ICM282A
• Control gas valve, ignitor, blower motor, inducer,
humidifier and air cleaner
• Microprocessor-based
• Designed for 100% gas shutoff in case of ignition failure
• Reverse polarity protection
• Secondary brownout voltage protection
• Heating and cooling fan functions in response to
standard thermostat
• Provides diagnostic LEDs to aid in troubleshooting
• Includes adapter harness (not shown)
• Twinning compatible with another ICM282A board
• Voltage: Line (98-132 VAC) @ 60 Hz
• Operating temperature: -40°C to 176°F
• Ignitor: 5A @ 120 VAC
• Cool blower: 30A, 2HP, 240 VAC
• Heat: 5A, 1/2 HP, 240 VAC
• Inducer motor: 4A, FLA-8.0 LRA @ 120 VAC
• Gas valve: 1.5A @ 30 VAC
• Carrier:
HK42FZ004,
HK42FZ007
HK42FZ008
HK42FZ009
HK42FZ011
HK42FZ013
HK42FZ016
325878-751
ICM284
• Microprocessor based
• Controls vent motor, blower control, hot surface ignitor
and gas valve
• Monitors timing, trial for ignition, flame sensing and
lockout
• Diagnostic LEDs to aid in testing/troubleshooting
•
Line voltage: 208 VAC @ 60 Hz
• Ignitor: 5A resistive @ 208 VAC
• Heat blower: 10A, .5 HP, 250VAC
• Cool blower: 30A, 2HP, 240 VAC
• Inducer Motor: 4A, 120 VAC
• Gas Valve: 4A @ 24 VAC
• Compressor: 5A resistive @ 24 VAC
• York: SI-03101280000
ICM286
• Microprocessor-based precision
• Controls inducer and blower fan motors, hot surface
ignitor, and gas valve
• Monitors timing, trial for ignition, flame sensing,
pressure and limit switches, and lockout
• Designed for 100% gas shutoff in case of ignition failure
• Reverse polarity protection
• Twinning compatible with another ICM286 control board
• Compatible with LP or natural gas
• Diagnostic LED to aid in testing/troubleshooting
Trial for Ignition: 7 seconds
Pre-purge Time: 15 seconds
Ignitor Warm Up Time: 7 seconds
Post-Purge Time: 15 seconds
Total Trials for Ignition: 3 (auto reset after 1 hour)
Heat Blower On: 30 seconds
Heat Blower Off: Selectable 90/120/150/180 seconds
Fan (Heat) On/Off Delay: 1 second
Cool On: 5 seconds
Cool Off: 45 seconds
• Goodman:
PCBBF112S,
B18099-26S,
0130F00005S
ICM287
• Microprocessor based
• Controls inducer and blower control,
• Monitors timing and gas valve
• Diagnostic LEDs to aid in testing/troubleshooting
•
Line voltage: 120 VAC @ 60 Hz
• Control voltage: 24 VAC @ 60 Hz
• Heat blower: 10A, 120 VAC
• Cool blower: 30A, 120 VAC
• Inducer blower: 30A, 120 VAC
• Goodman: B18099-04
ICM288
• Microprocessor-based precision
• Monitors pressure, roll-out and limit switches
• Controls gas valve, inducer draft motor, circulating
blower and hot surface ignitor.
• Reverse polarity detection
• Twinning compatible with another ICM288 board
• Diagnostic LEDs to aid in testing/troubleshooting
•
Voltage Range: Line (98-132 VAC) @ 60Hz
• Ignitor: 5A, 120 VAC
• Cool Blower: 10A, 2HP, 240 VAC
• Heat: 5A, ½ HP, 250 VAC
• Inducer Blower: 4A, 120 VAC
• Gas Valve: 1A, 24 VAC
• Humidifier Motor: 0.5A, 24 VAC
• Electronic Air Cleaner: 1A, 120 VAC
• Rheem: 62-24084-82
315.233.5266
Phone
All features and specifications subject to change without notice.
Customer Service Fax
315.233.5282
Application Assistance
800.365.5525
Visit www.icmcontrols.com to find all
of our latest products, sell sheets and wiring diagrams
26