Specifications

Freeze Protection
Freeze Protection Modules
APPLICATIONS
WIRING DIAGRAM
The ICM308/309/310 are low cost, fixed, single setpoint temperature controls that provide freeze protection.
ORDERING INFORMATION
Part #
Temperature
Cut-Out (OFF)
Temperature
Cut-In (ON)
ICM308
43°F 45°F
ICM309
28°F 55°F
ICM310
44°F 48°F
ICM Control Features and Applications Specifications Replaces
ICM308/309/310
• Low cost, fixed, single setpoint temperature controls that provide freeze protection
• Small compact package
• Epoxy encapsulated for moisture protection
• Temperature sensor included
• Input:
• Voltage: 18-30 VAC
• Frequency: 50-60 Hz
• Output:
• Solid state (triac)
• 1.5 amps @ 30 VAC
• Dimensions:
• 2” X 2” X 1 1/4”
N/A
Low Ambient Cutoff Switch
APPLICATIONS WIRING DIAGRAM
The ICM SC045 and SC055 are low cost, easy to install, single setpoint temperature sensors that can be used as
low ambient cutoff switches for condensor fan motors.
Outdoor Fan Motor Contactor
24
VAC
C
R
MODE OF OPERATION
The ICM SC045 and SC055 can be used as a low ambient cutoff switches for a condensor fan motor. When the
ambient temperature drops to 45°F/55°F, the SC045 or SC055 will open the fan signal and turn the fan motor off. It
will not allow the fan to turn back on until the temperature rises above 45°F-55°F.
ICM Control Features and Applications Specifications Replaces
SC045
• Cutoff setpoint 45°F
• 2-wire installation
• Input: 18-30 VAC
• Output: 2 amp maximum
• Temp. control range:
• 45°F (±5°F)
N/A
SC055
• Cutoff setpoint 55°F
• 2-wire installation
• Input: 18-30 VAC
• Output: 2 amp maximum
• Temp. control range:
• 55°F (±5°F)
N/A
Fixed Setpoint Thermostat
ICM Control Features and Applications Specifications Replaces
FS40 Frost Sentry™
• Easy 2-wire installation
• Fixed setpoint at 40°F
• Special foam backing improves accuracy; helps eliminate “wall effect”
• Compatible with most standard electric heating units.
• Ideal for storage areas, garages, workshops and crawl spaces
• Input: 18-30 VAC
• Output: 2 amp maximum
• Temp. control range:
• 40°F (±5°F)
N/A
315.233.5266
Phone
All features and specifications subject to change without notice.
Customer Service Fax
315.233.5282
Application Assistance
800.365.5525
Visit www.icmcontrols.com to find all
of our latest products, sell sheets and wiring diagrams
13