Specifications

Operating your radio - Search tuning FM
1. Carefully extend the telescopic aerial.
2. Press and release the On/Off button to switch the CD player on.
3. Rotate the Function switch to the 'Radio' position and then slide the
FM / DAB switch to the 'FM' position.
4. Press and hold the Tuning Up button your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show the
frequency found. If the signal is strong enough and there is RDS data
present then the radio may display the station name.
6. To fi nd other stations press and hold the Tuning Up button as before.
7. To scan the FM band in a downwards direction (high frequency to low
frequency) press and hold the Tuning Down button.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the Volume to the required settings.
10. To switch off your radio press and release the On/Off button.
4,6
7
9
13
USB SDCD Radio
3
Note: If you fi nd that FM reception is poor, try repositioning the Telescopic
aerial. Fully extend and position vertically for optimum reception. If you
fi nd that an FM broadcast has a lot of background hiss, this may often be
reduced by setting the radio into Mono reception mode for the current FM
station. Please refer to the section 'Stereo/Mono setting - FM' on page
16 for further details.
FM DAB
3