Specifications

Dynamic Range Control (DRC) settings - DAB only

DRC can make quieter sounds easier to hear when your radio is used in

a noisy environment. This function is only for the DAB waveband.

1. Press and release the On/Off button to switch the CD player on.

2. Rotate the Function switch to the 'Radio' position and then slide the

FM / DAB switch to the 'DAB' position.

3. Press and hold the Menu button to enter the DAB menu and then

release the Menu button.

4. Press the Tuning Up or Down buttons until the display shows 'SELECT

DRC'.

5. Press and release the Select button to enter adjustment mode.

6. Press and release the Tuning Up or Down buttons to select required

DRC setting (default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

7. Press and release the Select button to conﬁ rm the setting. The display

will return to radio mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the

broadcast does not support DRC then the DRC setting in the radio will

have no effect.

5-7

4,6

USB SDCD Radio

FM DAB

On/Off