Operating instructions

6
• File ext m4a (mpeg4 audio format) is not supported.
Files with ext.m4a have to be converted into mp3 or
other supported format.
Try
http://www.smartaudioconverter.com/?gclid=CPP4sd21g5
YCFQocQgodVnKeFA
16c. When playlist is selected it shows
“Empty”.
OR
Tracks are not showing in the correct
order. (You may be accessing
Windows Media Playlist or Albums --
tracks may not be in correct order).
It means your Library in Win Player is empty.
Left Click on the Library button and select ‘Add to the
Library’ – Just add all media folders to the library.
Make sure all your files are in one location – My music
folder.
Make sure under the ‘properties’ of this folder ‘Share this folder’ is
ticked i.e. sharing this folder is enabled.
Or
Media sharing setting may be causing this problem.
Do the following
Open windows media player (applies to WMP 11).
1. Click the arrow below the Library tab, and then click
Media Sharing.
2. Click Settings. The Media Sharing - Default Settings
dialog box appears.
(If the Settings button does not appear on the Media Sharing dialog box, media sharing is
not turned on.)
3. Select the options (tick the check box) Music, Pictures
and Video under Media types.
4. Select All ratings under Star ratings: Select All ratings
under Parental ratings.
Or
Create a playlist or folder under 'my playlist' on
PC ('Document and settings'--'All users'--'shared
documents'--'shared music'---'my playlist').
On the radio select the options in the following order
'Shared Media' -- your PC--'Music' -- 'Folders' --'Shared
Music' -- 'My playlist' -- and then select what you have
created above.
17. How to use snooze facility? There is a snooze facility. When the alarm is sounding, just
press the Alarm/Clock button on the remote control
18. Unable to perform factory reset –
it shows error
Disconnect the power for 30 seconds. Press and hold the
front panel rotary control, while holding connect the power
– keep holding the control until it displays ‘Factory Reset
Complete’ – it may take 10-15 seconds. Then, release the
control. See page 55
19. How to display time and date
while radio is playing?
It is not possible to display time/date permanently while
the radio is playing. However, you can display it
temporarily by pressing and holding the ‘Clock’ button on
the remote.
20. Unable to use UPNP. After
selecting it gives only one option
‘back’. (After following 14).
No PCs Found
If you are using any other firewall (apart from windows
firewall) then it could be firewall not letting access your
computer. Temporarily switch off the firewall then try and
get in touch with the firewall provider to configure it so
that radio can access your computer. Also see section 3 on
page65 of Operating Instructions Booklet.