User manual

4
11. When I select Register
option it says
Key:
Status: 404
It seems to be a problem with the Frontier server. The 404 or
Not Found error messages are http generated standard
response. Means that the client was able to communicate with
the server but either the server could not find what was
requested, or it was configured not to fulfil the request and not
reveal the reason why. 404 errors should not be confused with
"server not found" or similar errors, in which a connection to
the destination server cannot be made at all.
Factory Reset your radio and try it some other time.
12. Having problems with
media player facility.
If UPnP does not work as expected, possible reasons may
include:
UPnP functions blocked in firewall software
UPnP functions turned off by security software
UPnP functions ‘hi-jacked’ by other software
UPnP functions blocked in the router
Multi-cast packets blocked in the router
IP address of system blocked in firewall software.
You can try this free software http://www.orb.com/
Or http://tversity.com/download/
13a. Unable to use ‘Windows
Share’ under ‘media player’.
Make sure the port 2170 is
open.
• Check that there are PCs sharing Media on the local
network.
• If the PCs have a firewall installed check that either a)
the firewall is allowing all connections from the local
network or b) the firewall is allowing Netbios traffic.
Or turn off the firewall temporarily.
• If there is more than one computer on your local
network, ensure that any settings changes (including
booting up or turning off a computer) have had at least
5 minutes to take effect.
• Check that other Windows machines are able to see
the server from which you are trying to share your
files.
• Check that 'File and Printer Sharing for Microsoft
Networks' is installed and bound to the local network
interface. Ensure that the 'Server' service that provides
file and print sharing support is enabled and currently
running. (Control Panel, Administrative Tools,
Services).
• Try rebooting PC and radio
OR
Easier way to play media file on the radio is to use UPNP
Server. See operating Instructions to configure Windows
media player 11 as UPNP server. Or you can try this free
software http://www.orb.com/ or
http://tversity.com/download/
13b. When playlist is selected
it shows “Empty”.
OR
Tracks are not showing in the
correct order. (You may be
It means your Library in Win Player is empty.
Left Click on the Library button and select ‘Add to the
Library’ – Just add all media folders to the library.
Make sure all your files are in one location – My music folder.
Make sure under the ‘properties’ of this folder ‘Share this folder’ is ticked