Instruction manual

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Factory reset

If you wish to completely reset your radio to its initial state this may be

performed by following this procedure. By performing a factory reset, all

user entered settings will be erased.

1. Access the main mode menu by pressing the Back button then press

the Tuning Up or Down buttons until 'Settings' is displayed.

2. Press the Select button to enter the Settings menu. Press the Tuning

Up or Down buttons until 'Factory Reset' is displayed.

3. Press the Select button 'NO' will ﬂ ash on the display. Press the

Tuning Up or Down button until 'YES' is ﬂ ashing on the display to

proceed with the system reset.

If you do not wish to carry out a system reset, select 'NO' and then

press the Select button. The display will revert to the previous

menu.

4. With 'YES' ﬂ ashing on the display, press the Select button. A full

reset will be performed. The station list together with any preset

stations will be erased and your wireless network connection details

will be lost. All conﬁ guration settings will be restored to their defaults,

the clock and alarms will be reset.

In case of malfunction for any reason, reset the product as described

above to resume normal operation. It may be necessary in some cases to

disconnect the mains power then reconnect power after 10 seconds.

In case of malfunction due to electrical fast transient (burst), reset the

product as above (reconnection of the power source may be required) to

resume normal operation.

1-3 1-3

2-4

Information