Specifications

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Using the radio for the rst time

Your radio is supplied with a Mains Adaptor.

1. Placeyourradioonaatsurface.

2. Insert the adaptor plug into the DC socket located on the rear of your

radio.

The mains adaptor is used to connect your apparatus to the AC mains

supply. In order to completely disconnect the apparatus from the AC

mains supply, the mains adaptor should be removed from the mains

socket outlet.

3. Fully extend the telescopic aerial located on the rear of your radio.

The aerial should be fully extended and positioned for optimum recep-

tion.

4. Plug the adaptor into a standard 13 amp mains socket outlet.

5. Whenyour radiois rstswitched onthe displaywill show"Setting

Clock"andastationsearchwillbeperformedautomatically.

6. When stations have been found, the clock information will appear

on the display. When the unit is in standby mode you can press the

Info/Menu button to toggle between showing the time only or showing

both the date and time.

7. Ifnostationshavebeenfound"clocknotset..."willbedisplayed.It

may then be necessary to relocate your radio to a position giving better

reception.Youshouldthencarryoutanautoscantondstationsas

described on page 8.