Specifications

27
Connecting to an external amplier or recorder
Your radio has both digital and analogue outputs. You can connect your
radiotoanexternalamplierorrecorder.Thismaybeastand-aloneunit
oritmaybepartofyourexistinghi-system.
Recording from your radio
Your radio has four alarms which can be set to switch on your radio at a
preset day, time, and station. See section on page 19 for details on how
tosetalarms.Note:Thetimerrecordfunctionisforpersonaluseonly.
Digital connection
A programme/station can be recorded to an external device via the optical
toslink connector located on the rear of your radio. Connect the optical
toslink connector to the optical input socket(s) on your recorder using a
suitable cable.
Analogue (Line out) socket
A 3.5mm Line out socket located on the rear of your radio is provided
forconnectingtheaudiosignaltoanexternalamplier.Insertingaplug
into the line output socket will not mute the internal loudspeaker. Set the
volume control to adjust the speaker volume level as required.