Specifications

2
Setting the alarm time
Your radio has four separate alarms which can be set to wake you to
either radio or beep type alarm. Each alarm can be set to sound once,
daily, weekdays and weekends. The alarms can be set with the radio in
the on or the standby position. In the event of a power interruption your
radio has a built in memory chip that will maintain all your alarm settings
when the power is restored.
Note: If no buttons are pressed for 5 seconds the clock radio will
exit the alarm setup.
1. The alarms can be set with the radio in the on or standby position.
2. Press the
Alarm buttonand"Setalarm"willappearonthedisplay.
3. Press and release the
Tuning/Select control to enter the alarm
 setup.Iftherearenoalarmssetthedisplaywillshow"Alarmnotin
 use".
4. Rotate the
Tuning/Select control to select the desired alarm
1-4.
5. Press the
Tuning/Select control to select the alarm hour. The display
will show the current time in 24 hour format. The hour digit will be
selected.
Note: Alarm times are set using 24Hr format e.g. 2:30PM is
entered as 14:30
6. Rotate the
Tuning/Select control to set the correct hour.
3,4
5,6
19