Operating instructions

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Battery operation
1. Remove the Battery cover on the base of your CD radio cassette
by sliding the cover in the direction of the arrow.
2. Insert six LR14 (C/UM-2 size) batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown inside the battery compartment. Replace
the battery cover.
3. Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need replacing. If your CD radio cassette is not to
be used for any extended period of time it is recommended that the
six LR14 (C/UM-2 size) batteries are removed from the radio.
We would recommend for economy that your CD radio cassette is
used on the mains whenever possible with battery operation for
occasional or stand-by use only.
Mains operation
1. Place your CD radio cassette on a flat surface.
2. Plug the mains lead into the socket located on the rear of your CD
radio cassette ensuring that the plug is pushed fully into the socket.
3. Plug the other end into a mains wall socket and switch on.
7
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASS 1 LASERPRODUCT
LAITE
LASER
LLUOKAN 1
OPEN
ON
CD9960.pmd 11/24/2003, 12:21 PM7