Operating instructions

Recording from the Radio
1. Set the Function switch to the 'Radio' position.
2. Tune in to the desired station.
3. Adjust the Volume control to suit your requirements.
4. Insert a blank cassette with the tape surface uppermost and the side
you wish to record on facing towards you.
5. Depress the Record button to commence recording.
6. The recording level is set automatically and is not affected by the
setting of the Volume control.
7. To stop the recording press the Stop/Eject button.
8. When recording from the Medium or Long wave bands a whistle may
occur, should this happen operate the Beat cut switch located on
the rear of your CD radio cassette.
Note: If the Record button will not depress, check the cassette
safety tabs - see page 18 for details.
16
Radio
CD
Tape
Off
Off
Tuning
Min
Volume
1
2
3
5
7
CD9960.pmd 11/24/2003, 12:24 PM16