Operating instructions

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
F.Skip
B
.Skip
1
1
On
Repeat
Play/Pause
Prog.
Open /Close
16
5
Min
Volume
Playing a CD
1. Press the Play/Pause button to start playback. The Play/Pause
indicator will light up and the display shows the track number.
2. Set the Volume and Deep bass boost controls to the required
settings.
3. To pause playback press the Play/Pause button. The Play/Pause
indicator will flash. To resume playback press the Play/Pause
button again.
4. To stop playback, press the Stop button. The total number of CD
tracks will then appear on the display.
5. To take out the CD, open the CD door by pressing on the edge marked
Open/Close. The CD door should only be opened when the CD is
in Stop mode.
Selecting a track
1. Whilst the CD is playing, press and release either the F. Skip or
B. Skip buttons to change to the desired track.
2. You can also change tracks when the player is in stop mode. Change
to the desired track using the F. Skip or B. Skip buttons. Your
selected track will begin to play when the Play/Pause button is
pressed.
Search function
1. Whilst the CD is playing, press and hold down either the F. Skip or
B. Skip buttons. Release the button when the desired part of the
track is reached.
11
Play
/Pause
1
2
Play
/Pause
2
3
Stop
4
On
Repeat
Play/Pause
Prog.
On
Repeat
Play/Pause
Prog.
F.Skip
B
.Skip
1
1
2
CD9960.pmd 11/24/2003, 12:22 PM11