Instruction manual

89
Network proles
Each time that you connect your radio to a WiFi network, the radio will
store the details of that connection (SSID, security key, DHCP/IP address
settings) as a prole. Up to four such proles are stored in the radio so
that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radio stores the four most recent proles in memory identied by
their SSID. Normally the radio will attempt to connect to one of the stored
proles and only if it is unable to do so will you need to use the Network
Wizard (see page 15).
In the event that you visit a location only once you may wish to delete the
prole for the network in that location to avoid losing other proles.
1. Access the menu for the current mode by pressing the Menu button.
Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the settings menu.
2. Rotate the Tuning/Select control until 'Network' is highlighted on the
display. Press the control to enter the Network settings menu.
3. Rotate the Tuning/Select control until 'Network prole' is highlighted
on the display. Press the control to see the stored proles. The prole
which is currently in use (if any) is marked with an asterisk.
4. To remove a prole from memory, rotate the Tuning/Select control to
highlight the prole to be deleted and then press the control.
5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning/Select
control to select 'YES' and then press the control. The selected prole
will be deleted.
Note that it is not possible to delete a prole which is currently in use.
1
1-5